energy saving LED lights led downlights

Tips for Installing Downlight LED

When in the market for some lights, downlight LED is among the most common ones that you will see. If you are considering it, make sure to put into consideration the current fittings you have in your home or office where this light will be installed. Then you have to buy lights for those fittings. For example, if you currently have a GU10 lighting fitting in your house, then you can opt for LED downlights that are designed for it.

Some of the most popular fittings would include GU10, B22, E27, and MR16. If you are not sure of which one to get, you can take a few pictures of your fittings then search online to know what types of fittings they are and look for LEDs accordingly. As soon as you have it, you can consider the tips below during installation.

Use a LED Transformer

There are some types of lights that will require transformers while other would not, depending on the setup of the wiring in a building. Households that often have a 240v AC current are usually not compatible with most appliances sold online and will need a transformer. Generally, an MR16 light would run on a 12V DC and will require a transformer if used in a 240V system.

On the other hand, a B22, GU10, and E27 downlight LED that operates on a 240V AC current will not be needing a transformer if the 240V electrical setup exists. Thus, before buying LEDs it would be best to check how the wiring system in the household has been set up so you know which transformers and fittings you need to have.

Use a Dimmer Switch

If you will be using a dimmer during installation of your downlights, then you should purchase lights that are compatible with the dimmer. You also need to have a special type of dimmer that is specifically designed to work with LED lighting since a traditional dimmer will not be compatible with the latest light. In most cases, companies that sell LED downlight would have a list of recommended dimmers or all compatible dimmers that will help you find the right one.

Soldering LED Downlights

When soldering LED lights to the fixture, they should be at least 3 mm from the base of the resin. Aside from this, it should be free of any mechanical force and be sure that they are not heating up to avoid possible injuries and damages to the property. With the right set of tools, you will be able to measure heat, as well as the current that runs through the lights to make sure that it does not cause damage.

All Wires should be Insulated

After you have done the needed installation, be sure to check all connections and wires to guarantee that they are all insulated. This is because LED lights tend to be very sensitive to sparking and heat both of which could damage them. Thus, one final check should always be done before you screw everything back and use your lighting.

See also: oyster light

energy saving LED lights

LED Flood Lights: The Many Advantages that People Enjoy

Floodlighting has been an important part of security for business and homes. Whether it is connected to a motion detector or is being utilized to light up a garden during nighttime, LED flood lights are undeniably integral in security and the society as a whole.

Both businesses and homeowners have so much to deal with given this demanding economic times instead of having to worry about their floodlights. This is why LED flood lights have become available to provide them not just with an exceptional dispersion of light, but so many more advantages.


Life Expectancy

Among the best advantages of a floodlight would be its life expectancy. This kind of light can last thirty times longer compared to standard halogen floodlights. This will allow you to have more space as there is no need to stock up on replacement halogen bulbs. At the same time, the main power that is involved in swapping out the defective halogen bulbs could be expensive and time-consuming, especially for those who are running a business that needs floodlighting. Therefore, buying a flood light is a cost-effective option for client. This can repay your investments with exceptional savings in electricity costs and longer life span.


More Savings

With the high prices of utility, everyone is looking for ways to save money. By switching to a LED flood light, you will a fall in your electricity consumption which will result in lower bills. This light consumes a reduced number of watts as compared to halogen lights, thus providing an exceptional visual performance and low-cost electricity bills. Such type of light features an economical illumination technology of LED which provides exceptional brightness at a low power consumption.


Higher Lumen Output

Floodlights have so much higher output compared to standard lights. A single light can have the same effects as two or three standard lights. This is such a staggering statistic which means that with the longer life expectancy, as well as its exceptional brightness, less room will be needed to store the existing lights. This also means that home and business is now most cost-effective and affordable.

It is very important to keep in mind that when installing floodlights for the outside area, they should be IP65 in rating. This means that these lights have been designed and tested to stay strong in spite of different weather conditions and are safe to be used outside. This rating should not be overlooked as it is very important in the light’s performance when in the outside area.

Today, there are so many lights available for us to choose from. Many of them are available for aesthetic purposes while others tend to be more functional. But the trick here is to find one that can offer both and this is what a flood light can offer you.


energy saving LED lights

Highly efficient and durable energy saving bulbs

d900cl-image6-1Energy saving bulbs are rapidly taking over light sockets of our world. Whether by government’s push or personal choices the light producing energy-saving efficient bulbs provide great amount of illumination. There are several ways to save energy encompassing the use of compact fluorescent lights and with the use of solar lights. Another technique is the use of LED-powered energy conserving bulbs that are a great option for they are efficient, durable and long lasting as well. Light bulbs were energy saving bulbs that were extremely fragile that even burst during usage. With the passage of years glass became stronger and durable but still they were not as durable and long lasting as energy saving LED bulb. Made out of plastic material, LED energy saving bulbs was absolutely unbreakable for there was no use of fragile filaments and glass. Since the bulbs were sturdy, they were capable of withstanding extreme bumping and movements. Owing to the sturdy construction, such bulbs could be used in fixtures which traditional bulbs were unable to tolerate. Some of the examples are their usage in instrument panels and also in the electronic equipment that are usually jostled but their small parts are expensive and difficult to repair.

What are the probable reasons for switching on to energy saving bulb?

Energy saving bulbs offers very efficient lighting and illumination. LED bulbs when clumped together in the set of 180 bulbs offer very powerful lighting. You can sue them with diffuser lenses which in turn provides wider beam of lights. It is shown through studies that LED energy saving bulbs can use just 1/10th of powder of incandescent bulb used regularly. You can easily light up nine LED lights with the same power that was required to light up only one traditional light. So depending on the power needs, you can now light up the entire house with the same amount of power which was required to light the bulb.Traditional traffic lights are being substituted with LED lights, and now the municipalities are expecting to see an approximate reduction of power consumption by 80% and electricity costs. Such bulbs are extremely useful for remote areas for they help to reduce the number of electric lines and generators.

Energy saving LED bulbs has incredibly longer life. The bulbs are capable of conserving energy as they produce lesser heat to last longer. You can easily burn LED lights 24 hours a day, 7 days a week, and then also they can last for duration of 7 years. They last ten times longer than compact fluorescent lighting.

Is there any drawback of energy saving bulbs?

No there are no weak points of energy saving bulbs. However, the production cost of such bulbs may be a bit higher but their application and immense usage overcome the drawback. The cost of making gets recovered overtime. Combining durability, longer lives, efficiency, lower costs, everything adds to the winning technology of such bulbs. The bulbs are now exceeding customer’s expectation, and they can be bought from major suppliers.