energy saving LED lights led downlights

Tips for Installing Downlight LED

When in the market for some lights, downlight LED is among the most common ones that you will see. If you are considering it, make sure to put into consideration the current fittings you have in your home or office where this light will be installed. Then you have to buy lights for those fittings. For example, if you currently have a GU10 lighting fitting in your house, then you can opt for LED downlights that are designed for it.

Some of the most popular fittings would include GU10, B22, E27, and MR16. If you are not sure of which one to get, you can take a few pictures of your fittings then search online to know what types of fittings they are and look for LEDs accordingly. As soon as you have it, you can consider the tips below during installation.

Use a LED Transformer

There are some types of lights that will require transformers while other would not, depending on the setup of the wiring in a building. Households that often have a 240v AC current are usually not compatible with most appliances sold online and will need a transformer. Generally, an MR16 light would run on a 12V DC and will require a transformer if used in a 240V system.

On the other hand, a B22, GU10, and E27 downlight LED that operates on a 240V AC current will not be needing a transformer if the 240V electrical setup exists. Thus, before buying LEDs it would be best to check how the wiring system in the household has been set up so you know which transformers and fittings you need to have.

Use a Dimmer Switch

If you will be using a dimmer during installation of your downlights, then you should purchase lights that are compatible with the dimmer. You also need to have a special type of dimmer that is specifically designed to work with LED lighting since a traditional dimmer will not be compatible with the latest light. In most cases, companies that sell LED downlight would have a list of recommended dimmers or all compatible dimmers that will help you find the right one.

Soldering LED Downlights

When soldering LED lights to the fixture, they should be at least 3 mm from the base of the resin. Aside from this, it should be free of any mechanical force and be sure that they are not heating up to avoid possible injuries and damages to the property. With the right set of tools, you will be able to measure heat, as well as the current that runs through the lights to make sure that it does not cause damage.

All Wires should be Insulated

After you have done the needed installation, be sure to check all connections and wires to guarantee that they are all insulated. This is because LED lights tend to be very sensitive to sparking and heat both of which could damage them. Thus, one final check should always be done before you screw everything back and use your lighting.

See also: oyster light